How to String a Fishing Pole

How to String a Fishing Pole: A Step-by-Step Guide

After buying fishing pole, reel, and line, you probably wonder how you will string the line. Though stringing the line to the rod is very easy, it would be a tricky task if you are a first-time angler. There is also a possibility that you might make it a complete mess.

 

This article will certainly help you fulfill your wish to become a successful angler. Who does not know that success in fishing will depend much on nice stinging of line and rod? If you are a beginner and do not know how to string a fishing pole, this post is for you. After reading this article you will find this job super easy.

 

Quick Guide on How to String a Fishing Pole

 

To string a fishing pole, what you just need is to follow the instructions below:

 

  • To string a line, first, you need to flip up the bail to open it, otherwise, you cannot tie the first tie of the line to the reel. So, open the bail first by flipping up.

 

  • Wrap the tag end around the arbor.

 

  • Now with the tag end and standing end use an overhand knot to tie the line to the spinning reel. Do it twice and pull it down. Cut off the tag end of the line.

 

  • Now, your reel is ready to be wrapped around. Put your spool flat on a level surface.

 

  • Wind the reel hand. Don’t wind so fast. When the line comes off the spool, make sure that the spool rotates anti-clockwise.

 

  • And also make sure that when your reel drags the line, your pinch of index and thumb do not let the line loose. So, keep it steady over the reel. Otherwise, the crunch and twists of the line make your task difficult.

 

  • You can also slack the line to check if there are any twists on the spool. If you notice any such twists, flip over the spool and wrap again. Don’t load it over-brimmed or full. Keep some space of one-eighth of an inch so that your line can get a firm attachment with the reel.

 

  • Now cut the line off from the spool with a pair of scissors. Don’t use your teeth. You must love your teeth, mustn’t you?

 

  • You have already completed 80 percent of your job. Now, pass the ending of the reeled line through the guide that is closest to the reel of the rod. Likewise, pass it through every other remaining guide of the rod and keep 3-4 feet of the line hanging down from the end of your pole.

 

  • Now time to string the line to the hook. Take the end of the hanging line. Thread it through the eye of the hook.

 

  • Twist the tag end line and standing line 7-10 times. Look a loop has been created closest to the eye of the hook. Stick the tag end of the line through the created loop. Do it again. Now slid it down. You can use some saliva to get the line moistened so that the jamming of the knot could be thoroughly perfect.

 

How to String a Fishing Pole

 

How to Restring a Fishing Pole with a New Line

 

When the fishing line runs out of its lifetime, you need to re-spool it. Learning how to restring a fishing pole is very important before you for fishing. However, how do you know that a line requires to be replaced with a new one? Well, it depends on a variety of factors when it comes to the time of replacing a new line. If you are a regular angler, you might need to change the line every year. If you are an avid angler, you might require to change the line even quicker than a year. However, you  should interpret the following issues as signals that it is probably the time to change your fishing line:

 

  • Visible roughness
  • Issues while casting
  • Poor knot strength
  • Twists in the line

 

However, when you are not getting the expected strength and service out of your line, you should restring the fishing pole with a new line. Here’s how to restring a fishing pole:

 

Step 1: Attach the new fishing line

 

Though many tackle shop comes with a machine for loading the fishing line, you can do it yourself too. Here’s how to do it.

 

First of all, open the bail on your spinning reel. To do so, just flip up the wire arm of the reel. To tie the new line to the arbor, you have to make an arbor knot. Once done, close the bail by flipping the little arm down.

 

Step 2: Learn to tie the arbor knot

 

If you are a beginner in fishing, you might not know how to tie an arbor knot. Here’s how you can tie an arbor knot:

 

  • Wrap up the tag end of your fishing line centering the arbor. The next step involves making a pretty simple overhand knot around the standing end of the line.

 

  • You have to tie another standing knot with the tag end. It should be tied just a couple of inches down from the first one.

 

  • Once done, pull both the knots together so that they jam against the spool.

 

  • Cut the tag end off.

 

Step 3: Spool the spinning reel

 

Lay the spool on the surface. Make sure that it is laid flat on the floor and not on its side. The direction of the line should be in the same direction as that of the spool when it comes to loading the line onto the reel.

 

Apply tension by your thumb and the index finger by pinching the line. Make sure that the line remains free from twists. Turn the handle for about 15 to 20 times. Make sure that you are maintaining the required pressure on the fishing line.

 

Stop for a moment and give the line a slack to check whether the line is twisting or not. If you notice any twists flip the spool over and redo. You should use the side that gives no or minimum twist.

 

Make sure that you don’t overfeed the spool. Just fill it up to ⅛ of an inch from the rim part. That’s it. You are now ready to go fishing again with the new line in your fishing pole.

 

How to String a Fishing Pole

 

Important Things to Consider while Stringing a Fishing Pole

 

There are different types of lines and reels used in fishing. Stringing a fishing pool might differ as per the choice of line and the reel. The kind of fishing line and reel you should use depends on different fishing situations. In the following part, we will be talking about different kinds of fishing line and reels and how to string different kinds of fishing reels on the pool. Let’s go ahead.

 

 

Types of Fishing Lines

 

Anglers generally use any of the  three kinds of fishing lines:

 

  • Braided fishing line
  • Monofilament fishing line
  • Fluorocarbon fishing line

 

Braided Fishing Line

 

Braided fishing line is not an outcome of any new technology. It is one of the ancient types of lines. Studies found that the braid method was even popular even in the prehistoric period. The cavemen would use the surrounding materials for using this method. It helped them to fish for a living.

 

By the way, line manufacturers came up with changes after the early nineties when it comes to the materials for braided line. And that’s what changed the game by making a braided fishing line attractive to the modern anglers.

 

Braided lines made today are not as bulky as it was before. It has gone under technological advancement to a great extent. Braided fishing lines are very strong and it is possible to find them up to the 200-pound test.

 

However, though the modern braided fishing lines are way thinner than it was in the bygone days, many anglers still do not like this type of line. One of the reasons can be that a braided line is easily noticeable to fishes and thus scare them away when they come closer to the lure or bait.

 

Monofilament Fishing Line

 

Monofilament fishing line is an ideal choice for beginners. The main reason for its popularity is that unlike braided lines, it is easy to use. This kind of line fits better in the reel with minimum slippage possible.

 

Another great advantage of the monofilament fishing line is that it is not easily detectable underwater and that’s why fishes don’t run away being scared as it is the case for a braided line.

 

However, despite having advantages, the monofilament fishing line has some drawbacks as well. If you talk with an experienced angler, he can show you where this fishing line sucks. Firstly, it comes with a certain amount of stretch which results in holding the reel shape and make it curly.

 

Another drawback of the monofilament fishing line is that you might miss the nibbles of light biting fishes. It is the stretch factor of the monofilament line that is responsible for this issue. It does not send the jolt to the rod as the line itself can absorb the jolt produced from the bite.

 

Fluorocarbon Fishing Line

 

The fluorocarbon fishing line is the most updated kind of fishing line available out there in the market to buy. It is new in the scenario but has gained much popularity over the recent years.

 

The biggest plus point for having a fluorocarbon fishing line is that it is almost invisible in the underwater and it seems that it has just melted with the water. It can easily trick even the most meticulous species of fishes with this line in your reel.

 

As it is free from holding any memory of shape, you can stay relaxed about the fact that your line will be away from curls which are common for monofilament lines.

 

 

Types of Fishing Reels

 

Choosing the reel type that meets your needs is the primary step for stringing the fishing pole. Each type of reel is not made for the same type of fishing situation. You should decide the type of reel after knowing the different types of reels and their application in fishing.

 

Though there are different reels for different fishing situations, many anglers use one type of fishing reel throughout their lives. It is because they do not want to go beyond their comfort zone.

 

However, it can be picky when it comes to fishing reels if you like to use the appropriate kind of fishing reels based on fishing situations. Here are the 4 most common types of fishing reels to choose from:

 

  • Spincasting Reels
  • Baitcasting Reels
  • Spinning Reels
  • Fly Reels

 

All types of reels have the pros and cons of their own. The fishing situations they are used in is not similar. And most importantly, they are supposed to be strung differently. Let’s now know something about these reels along with how you can string these fishing reels one by one.

 

Spincasting Reels

 

Spincasting reels are also called closed face reels. Though these kinds of reels are much used for children, any angler who is just beginning his fishing pursuit can start with spin-casting reels as well. One benefit of spin-casting reels is that you will find it very easy to use. It just requires a push in a button to cast it. But, you have to make sure that you keep holding. If you intend to keep your cast within a short distance, push the button once again. This will stop the line from going farther.

 

An important aspect of spin-casting reels is that it comes with smaller spool compared to the other types of reels. Though it will limit the line, it is not a big deal for the beginners. Less amount of line will save any beginner from having tangles within the spool.

 

How to String a Spincasting Reel

 

  • Do not forget to check the spool capacity. You will find it preprinted on the reel you are using.

 

  • Take off the cone cover part of your reel. Make sure that you have unwinded the line if that is yet on the reel.

 

  • The spinning direction of the line spool should be identical to the spin of the reel.

 

  • Feed the end edge of the line through the closest eye to the reel. Then, feed the end edge into the loop of the cone cover.

 

  • Now it’s time to fasten the line to your reel. To do this, wrap the line around your reel. The next task will be tying an overhand know. The standing line should be included in this knot. You should make sure that you have tied the same knot when it comes to toward the end of the loose end of the line.

 

  • Trim any additional or excess line from the loose end if it hangs after the knot.

 

  • Then, get the cone-shaped cover on again. While doing it, make sure to hold some tension on the fishing line. You can do it by holding the line between your two fingers.

 

  • Reel up some feet of the fishing line now.

 

  • Take off the cover again now for checking the line amount on the spool. You have to follow this as it can ensure that the spool is not overfed or overfilled. Keep some space empty from the top.

 

  • Now get the cover attached again to your reel and trim the line from the spool. You are now ready to line through the other holes of the pole. Tying the tackle to the pole is the last step to make you ready for fishing.

 

Bait-casting Reels

 

If you intend to handle heavy bait or line, bait-casting reels are ideal for you. As it can handle heavier bait and line, it enables you to catch bigger fishes such as catfish and bass. A bait-casting reel is also designed to suit saltwater fishing.

 

If you are an angler who has explored and mastered the strength of thumb for controlling the spool, this reel is just a perfect match for you. Once you become an expert in using bait-casting reels, you will soon realize that your casting accuracy has improved to a great extent.

 

How to String a Baitcasting Reel

 

  • In case you cannot go to any reel filling station, you will need the help of another person to string a baitcasting reel. However, if you access to the none of these, a screwdriver and a vice can also help you. Placing the handle of the screwdriver with a Phillips’s head into the stationary vice, you can easily get it to tighten down. The next step will be sliding the spool atop the screwdriver.

 

  • The spinning direction of the line spool should be similar to the spin of the reel. Matching the spinning direction of the line spool with that of the reel is very important.

 

  • Feed the loose end of the line into the pole-eye that stands closest to the reel. Put the line-end into the receiver of the line. Make sure that the line you are putting goes back of the receiver all through the way.

 

  • When the line is reached at the back, the next task you have to do is to make an overhand knot. It will help to secure the fishing line. Now, trim the excess line from the loose end part.

 

  • Make sure to put a little tension to the line applying your two fingers. You have to keep this tension up while you reel. You have to ensure that this tension remains active until you complete the reeling onto the spool.

 

  • Do not overfill the spool. Doing it can cause you headaches while you fish.

 

  • When you have filled your spool successfully, cut the line. Now, you have to feed the line into the other eyes of the pole.

 

  • Tie the bait or tackle you want to use. That is the last part of stringing a baitcasting reel.

 

Spinning Reels

 

Spinning Reels are also called as open-face reels. Spinning reels are very popular with modern anglers. One of the reasons why spinning reels are so popular is the variety of sizes it offers. On top of that, you will find it very easy to use. Buying extra spools will enable you to change the line quickly while on the water.

 

Though a spinning reel is not the best choice for handling the heavier loads, it can still handle up to 20 pounds. Loops or twists in the line occasionally is a drawback of spinning reels about which many anglers complain. However, you can easily handle these minor issues when you are in the field.

 

How to String a Spinning Reel

 

  • Like it is the case for all the other reels, a reel spin and the spool spin should always be in the same direction. If it does not spin in the same direction, you might get twists or kinks in your fishing line.

 

  • Feed one end of the line into the pole-eye that stands closest to the reel.

 

  • After opening the bail, wrap the fishing line around the spool. To keep the line in the right place, make an overhand knot as you do for other kinds of reels. You have to include the standing line carefully into the knot. With the loose end of the line, you need to tie another overhand knot. This second knot will prevent the fishing line from slipping off. When the knots are tied perfectly, cut the additional fishing line from the loose end.

 

  • Now close the bail and then apply tension to your line to get some line off the spool. Apply the tension using two fingers to make sure that your string is not too loose.

 

  • Make sure that you have fulfilled the reel within ⅛ of an inch of the rim. Be careful when it comes to reeling the line onto the spool so that you do not overfill it.

 

  • Now, it is time to trim the line off the spool. Open the bail to feed the rest of the eyes of the rod with the line. When you are done, close the bail so that your hard work is saved.

 

Fly Reel

 

The fly reel does not replace any other fishing reel. It is comparable only with itself. Apart from giving you the joy of catching fishes, the style it lets you adopt is a sport itself. The fly reel holds the line in a way that the line gets enough resistance to bring your catch to you.

 

Choosing the correct fly reel is a bit tricky task to do. The fly reel you use should cope with the weight of the fishing line you have chosen to use.

 

There are many fly reels available out there in the market that will rust easily after getting wet. That’s why you should be careful to choose one that does not rust even if it gets wet. Maybe this will cost you some extra money, but you will get a longer lifetime and service out of your fly reel. The benefits you get from this type of fly reel will outweigh the extra dollars you spend while buying one.

 

How to String a Fly Reel

 

  • The first step to string a fly reel starts with attaching the backing line to the reel. You need to tie an arbor knot to do that.

 

  • Once done, the second step is to reel the backing line onto the reel spool. Make sure that you apply tension on the backing line while doing so.

 

  • With the backing line, tie the fly line now. The most appropriate knot to tie now is the Albright knot.

 

  • Now, it is time to reel your fly line onto the spool. Have a careful look at the amount of line you have added to the reel. Make sure that you do not overfill the reel. If you do so, you will experience tangles. On top of that knots in the line can interrupt your fishing trip.

 

  • The last step that is left to do for you is to tie a leader line to the fly line. Once you have completed that, you are ready for fly fishing!

 

Frequently Asked Questions (FAQ)

 

What are the factors that determine the lifespan of a fishing line?

 

The lifespan of a fishing line depends on a variety of factors. The most common factors include the following:

 

  • Weather
  • Storage of the fishing line
  • Fishing conditions or situations

 

When it comes to the weather, high temperature is one of the responsible factors for breaking down the strength of the line as it stretches out the line.

 

If the bottom of the river you are fishing in is rocky, that will also wear your fishing line down. Monofilament lines are vulnerable to heat and UV light.

 

Though fluorocarbon fishing lines are comparatively more strong and durable against hot weather, you need to change them more frequently. It is the braided line that does not need frequent change.

 

How to string a Zebco fishing pole?

 

Stringing a Zebco fishing pole is not very difficult. To string a Zebco fishing pole, you need to have the following:

 

  • A Zebco fishing pole
  • A pair of scissors
  • A working fishing line

 

Here’s how to string a Zebco fishing pole:

 

  • Lay down the spool on the surface. Make sure that the surface is flat. Take the edge of the fishing line using your index finger and thumb. Feed the line onto the loop of the pole that stands closest to the spool. Do the same for all the eyes of the pole until you meet the opening hole of the Zebco reel.

 

  • Apply a twist toward counter-clock motion to remove the reel cover. Make sure that you have pulled off an adequate amount of string throughout the ultimate eye before twisting the cover off. Thread the line or string now though the center hole of the cover.

 

  • Now have a look at the reel and give a push to the release button. You will see that the catch-reel is moving ahead. Tie the line end centering the spool that stands behind the catch reel. Go forward by making several knots and then trim off any additional line left outside the reel.

 

  • Put back the cover of the reel and then start reeling the line onto your spool. You can use your thumb and forefinger to apply some pinch on the fishing line before coming in the middle hole part of the fishing reel. In this way, the line will not get twisted or kinked. The amount of line you want to see on the Zebco spool depends on your choice. However, we recommend that it should be around thirty to forty yards.

 

That’s it, you have successfully strung a Zebco fishing pole.

 

 

How should I take care of my fishing line?

 

Taking care of your fishing line is important for getting a longer duration out of them. Here is how to take care of your fishing line:

 

  • Make sure that you feed the line properly into the ey of the fishing pole. Do not feed into the framework of the pole eye. Feeding the line properly will save you from many issues later on.

 

  • Before you keep the pole in storage, make sure that you have taken away heavy tackles like sinkers and lures from the fishing line. It will help to prevent any kinks in the fishing line.

 

  • You should wet your fishing line to reduce stress before you tighten up the knots.

 

  • Before you start the fishing trip, keep some time apart to check the line for any damage or issues. It will let you fish without any hassle.

 

  • Be extra careful when you fix the tangles in the line. If you are in a hurry, you might end up doing more damage unintentionally.

 

When should I change my fishing line?

 

Usually, you need to change a fishing line once every year if you use it moderately and with care. However, the changing frequency of fishing line depends on many important factors such as the frequency of fishing, weather type, and fishing situations.

 

Final Thoughts

 

Stringing a fishing pole might seem easy to the experienced angler. But when it comes to a new angler, it might become a hard nut to crack. However, we believe that our fishing pole string guides will help beginners to learn how to string a fishing pole properly. Enjoy fishing!

Leave a Comment