Fishing is a popular hobby for many people. Besides, it is also considered as a popular form of sports in many countries. There are many different types of fishing techniques such as spearfishing, netting, angling, trapping, etc. Many enthusiastic fishermen enjoy the angling method for fishing. It is a popular form of fishing. Pole, line, reel, and angle (hook) are used in this method.
In the beginning, it seems difficult to set up the pole. However, with time, the spinning pole and reel will enhance your fishing competency and will give you the efficiency of catching any kind of fish. First of all, you just need to buy a new fishing pole and reel, and then you have to learn how to put a line on fishing pole.
You will find fishing poles available in many sizes and credibility in the market, and their price may vary depending on their quality. But a fishing pole without fishing line is like a rocket without fuel. It may look good, but useless until you refuel it. In the case of an old fishing pole, over time, your fishing line becomes peaky. Then it becomes difficult to catch fish with it. To catch plenty of fish, you have to change your fishing line at least once a year.
Without having any previous knowledge or skill on a fishing pole, you can put a line in it Adding a line to a fishing reel is a simple process. Let’s dive into our guide on how to put a line on a fishing pole.
How To Put A Line On A Fishing Pole
Line fishing is a sub-branch of angling. You have to use a fishing line in this method. The material and length of a fishing line can be different depending on the place and methods of the fishing. You can use different kinds of fishing lines. Some common line fishing methods are Droplining, Handlining, Jigging, Longlining, etc. Let’s now move into a deeper discussion.
Necessary pieces of equipment:
Fishing Hook / Bait
Step 1: Introduction of the important parts of the equipment
The fishing line is wrapped up around the spool.
By turning the handle, line returns into the reel. The handle is often made up of a plane material for getting comfort while using it. You have to hold it the whole time while fishing.
Generally, the bail is a metal arm. It can stop the line from coming out of the spool. When it is closed, no line can come out of the spool. On the contrary, the line can come out of the spool easily if you keep it open.
The reel foot assembles the rod to the reel.
When you close the bail, the drag knob permits you to set the free movement of the line. If you tighten the knob, the line cannot come out of the spool. If you do the opposite, the line can come out of the spool without much effort.
The line roller leads the way to the line in its journey.
Usually, the last 4 inches of the rod is called the tip. It is the thinnest part of the rod that deals with a fish. As the tip is the sensitive part of the rod, you have to be careful while catching fish.
Guides are small circles that help the line to pass away. They will help you to keep the line attached to the rod.
The reel seat secures the reel to the rod.
To make fishing lines, you can use one of the following three materials: Monofilament, fluorocarbon, and Braided. Among them, the Monofilament is the most appropriate one for spinning reels.
Monofilament is the least expensive material but more durable compared to others. When it comes to the material, nylon is the main component of monofilament lines.. So, It is very smooth and elastic.
Fluorocarbon is the newest of the three and anglers love to use it. They are deeper and heavier than monofilament. These lines are not so skimmed and resistant to friction. Many anglers use such a fishing line because it is stable and almost imperceptible in water.
Usually, Braided is made of synthetic materials. As it is stronger than the two mentioned above, braided line is the best choice when your target is to catch large fishes. It comes without any propagation.. So, you will find it easy to feel the movement when you have got any fish at the other end of the line. Also, it sinks more gently.
However, throwing the bait is way easier with monofilament or fluorocarbon.
Step 2: Prepare your fishing rod
A fishing rod is a long stick-like object which is used by the fisherman to catch fish. It is a simple stick or pole which ends in a hook attached to a line. Its structure varies depending on the design. You may extend it like a telescope, or you can buy it in smaller pieces of poles.
If it is extendible, you have to expand it. If it has arrived in pieces, merge it: after picking the base, you have to attach other parts insert the base and twist them one after another.
After lining-up the parts with each other, you can check the adjustments by aiming at a remote object with one eye closed through the guides.
Step 3: Attach your reel to the rod
After taking the reel out of the box, you have to observe the part that is going to be attached to the rod.
Then, you have to take notice of the locking system cautiously.
Your reel seat may have a different locking system- up locking, down locking, etc. Don’t worry. You have to just find which will help you to lock onto your fishing rod. Then, attach it.
After attaching it, your reel should be touching the tip of the rod.
Step 4: Roll the line onto your reel
Spooling or rolling line on the reel is an important step to fishing. It can put you in difficulties and make you frustrated when fishing if it is not prepared properly.
First of all, you have to open the bail. Then, keep the line around the reel once. This should result in two pieces of the line. Tie a standard knot with the pieces. After that, tie another knot with the resulting pieces of the line. Cut the loose piece of line from the reel and close the bail. Then, tightly hold the line a foot away from the reel. This will prevent the line from getting complex when the line is put on the reel.
Slowly turn the handle on the reel. At first, you need to turn the handle 20 to 25 times for having enough lines on your reel.
You should not fulfill the reel; rather keep some space on the edges of your reel so that the line can’t come off.
Cut the line leaving 2 to 3 feet of extra line hanging from the tip.
Step 5: String the rod
After taking the loose end of the line from the spool, you have to drag it through all the guides on your rod one after another from the rod tip to the nearest to your reel.
In case of opened face type spinning reel with a bail around it, tap the bail into the open position. You need to remove the prod by unscrewing it if your reel is the closed face type. Then, you have to pass the line through a hole in the rod onto your reel.
Attach the line by tying it to the spinning part of the reel.
You can tie the line to the reel by using any knot, but the arbor knot is preferable.
To use the arbor knot, at first you have to tie an overhand knot at the loose end of the line. Then tighten it and wrap the line around your reel. Tie two more overhand slip knots. Pull both ends of the line to let all three knots sit perfectly.
Step 6: Check the right direction of the line
After putting the line in your reel, you have to observe the direction your reel is turning.
Put the spool on a surface and observe it. If the line is coming off counterclockwise, it’s ok. If not, tap the spool over so it comes off in the right direction.
This process will help you to avert line twists.
Step 7: Attaching the hook/bait to the line
The hook is adjoined to the open end of your line. Clinch knot is a good choice to tie the hook. Pass the line through the ring of the hook. Next, twist both ends of the line around each other and tighten them with a strong knot.
You have to cut the excessive tags at the open end of the line with the scissor.
Step 8: Setting the Drag Knob
You have to turn the drag knob clockwise to make it tight or counterclockwise to make it lose.
Pull the line from your reel to visualize how the drag has been affected and repeat these steps until the drag is set up. To perfectly learning the visualization process, you have to consult with someone experienced in this work. If you don’t get help from anyone, you have to set your drag on the loose side because setting it tight can break your line while fishing.
Before start fishing, you have to adjust the drag every time. However, you can change its position according to your necessary while catching fish.
If your drag is too loose, the fish can easily take the line out of the reel. The hook will have little impact on the fish and allow it to spit the hook out.
If your drag is too tight, the fish will not take out any line and it will put pressure in your hand. It may break the line.
The position of the knob will depend on the size of the fish and the type of the line. However, you will quickly learn the process of setting your knob once you get out to the water and start catching fish.
Step 9: Casting the bait
Make sure that about 1-2 feet of line is dangling from the tip of the rod. Then, maintain the distance of a few inches between the rod and the base of the reel as well as the line parallel to the rod. To complete the process, use your right hand. With the opposite hand, you have to open the bail. Make sure you are holding the correct line when the hook is free.
Hold the base of the rod and bolster it backward, away from your target. The rod should be revolving around a point in between your two hands. Then quickly dangle the rod towards your target and release your hand.
Don’t worry if your bait doesn’t cross many paths. It usually happens to every beginner while learning how to cast. Just keep practicing. Very soon you will be master in casting.
Step 10: Reel in the Line
At first, you have to close the bail. Then you need to place the line in the line roller and turn the reel handle. There are plenty of ways of reeling in fast, slow, at a constant speed, fast or slow intervals, etc. However, there is no constant variable because of its dependence on time, temperature, and weather along with many other factors.
Step 11: Be prepared to catch fish
Finally, you have accomplished the basic steps and your pole is ready to catch fish. Now you can enjoy the benefits of continuous practice and constant efforts. Go with your fishing pole and try to catch some fish.
Frequently Asked Questions (FAQ):
How much line I should put on a fishing reel?
Generally, you have to put enough line on your reel until there is a 1/8 inch gap between the line and the top of the spool.
How do I fix the fishing line on a reel?
Please follow the above discussion. You will get your answer.
Why does my fishing line keep unraveling?
Spinning lures can cause unraveling fishing lines. A swivel head impedes this problem from happening because you can tie the lure directly in it. It will help to remove the twist.
Is 150 yards enough fishing line?
150 yards should be plenty of lines. The problem is not the amount of line you have but the drag capability of your reel.
How do I know when my spinning reel is full?
If you put too much line on your reel, you will get a weird sound when you cast it.
Can you use fluorocarbon as a mainline?
In dirty water, the benefits of using fluorocarbon as the mainline are better than compared to monofilament.
Can you use fluorocarbon on a spinning reel?
Yes. If the line is under 8 lbs., it is possible to use fluorocarbon on your spinning reel. Anything above that will give you a poor result.
How Often Should You Change Freshwater Fishing Line?
You should replace your fishing line once or twice a year.
How can I reduce my line memory?
Yes, you can do that. What you need to do is to stretch it between the fingertips. However, there is also a better alternative to this. Tying on a weighty lure and trolling it behind the boat also works. The other method is throwing your spool into a pot of boiling water for a few minutes. This process reduces line memory easily.
What color fishing line is best?
Yellow and Red color line is most preferable.
Why does my fishing line keep twisting?
Because of the misuse of spinning reels, your fishing line is producing line-twist. The line that comes off the spool should follow the same direction when it comes to go onto the reel.
How long does the unused fishing line last?
There is no perfect answer to this question, but generally, monofilament has an average life span of two to three years, while fluorocarbon lines can last up to seven or eight years.
Is it better to fish with bait or lures?
Many species of fish are less attracted to lures than bait. If you want to be an expert in lure fishing, you have to acquire a higher degree of skill than bait fishing.
So, do you now know how to put a line on a fishing pole? We hope that you have got a clear idea of how to set up your fishing pole. People always like to try new things and want to explore them with different kinds of works. Fishing is such a wonderful experience that will give you pleasure as well as a great opportunity to pass your time by learning something special. If you learn all the methods of preparing your fishing pole, soon you can become a great angler.
When you buy a new fishing pole and other pieces of equipment, don’t make a hurry. At first, ensure that you have learned all the things that will help you to prepare your fishing pole to use. Learning something new is always enjoyable and no learning goes in vain. So keep learning with fishingever and enjoy fishing.